|
It is currently Thu Nov 21, 2024 4:59 am
|
|
Page 1 of 1
|
[ 13 posts ] |
|
Author |
Message |
RADO
Joined: Sat Jun 25, 2016 8:36 am Posts: 7
|
New member, in the hunt!
Hello from Thornton! I've been lurking for the last couple months and hoping to be a future Bronco owner. I recently sold my weekend toy, which was a moderately built Vehicross. Over 7 years of ownership, the VX became a project where I learned all about suspension design, steering, axle gearing, welding, fiberglass, vinyl wrap, and so on. In the end, the VX was on 37" tires, dana 44 radius arm front with ORI struts, rear triangulated 3-link, selectable lockers and a whole lot of other custom work including a rock bumper and tire carrier. The real challenge was getting the VX to cruise at 80MPH on the highway again, which it eventually was able to do. After all this work, I had a kid and finally realized I wanted something bigger to use with the family.
I'm hoping to take everything I learned working on the VX, and apply it to a classic Bronco. I've wanted one for YEARS, and now I have the opportunity to finally buy one. I'll be keeping my eyes peeled and have activated all of my craigslist searches. Of course, I would appreciate help in my search if anyone happens to find a deal.
My budget is a bit restrictive at $15k or less. I'm considering going cheap and getting a rebuild project, but would prefer a Bronco with some previous love that just needs further improvement.
Anyways, thanks for letting me join the forum! Hopefully I'll be an actual Bronco owner sooner than later...
|
Sun Sep 18, 2016 8:12 am |
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm Posts: 3980 Location: Roxborough Park, Colorado
|
Re: New member, in the hunt!
Hello and welcome to the best affliction around.
Are you wanting to get a Bronco that will be as functional / capable as your VX was built ?
_________________ 1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
Sun Sep 18, 2016 9:29 am |
|
|
RADO
Joined: Sat Jun 25, 2016 8:36 am Posts: 7
|
Re: New member, in the hunt!
Thanks!
I would want to build a Bronco for more dual purpose than the VX. The big challenge on the VX was the SAS and steering, but a Bronco will already have the solid front axle. I'd probably be happy keeping the stock suspension setup instead of going for a super flexy linked set-up. If I'm not mistaken, the later year Broncos came with stronger axles (9"/D44)... that would be a real benefit to start out with. Right now, I envision 35" tires, select-able lockers, full roll bar, and basic recovery equipment (like air & a winch). A set-up like this would keep me happy for a while and I'm sure I'd find additional things i'd want to modify.
|
Mon Sep 19, 2016 8:15 am |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: New member, in the hunt!
First, I would love to see a pic of your VX!
Second, with the proper setup, you are on the right track to a rig that can handle some solid trails as well as the highway.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Mon Sep 19, 2016 7:29 pm |
|
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am Posts: 6198 Images: 0 Location: Lakewood
|
Re: New member, in the hunt!
I think I saw your Vehicross up on Craigslist. Looked like a fun and unique rig. You can build a great dual purpose ride. I'm on long travel suspension, full widths, and 37's and drive my Bronco all over town. It's not very civilized, but I've had it up to about 85 without incident. It runs out of torque and gears to do that for any length of time. Your plan sounds like a good one overall, especially since you can wheel any trail in the front range with the setup you're describing.
|
Mon Sep 19, 2016 10:01 pm |
|
|
RADO
Joined: Sat Jun 25, 2016 8:36 am Posts: 7
|
Re: New member, in the hunt!
Yep, I found the trails around here get to a point where you can enjoy most of them with a moderately built rig... or you're running carnage or independence and getting body damage. I never wanted body damage on the VX, so I avoided the really challenging trails (and it may have not been built enough anyways). I stopped driving the VX as much around town because the tires were $450 each and my insurance was highly undervalued for all the work I put into it. In addition, taking my 1.5 year old daughter with me was such a hassle, I didn't enjoy owning it as much as I once did. It was time to shake things up a bit. I want to enjoy driving this future Bronco and make it a decent family trail rig. Anyways, just need to find a good Bronco now so I can stop day dreaming and start wrenching! I had the VX on CL for a couple months. I did a pretty good job with keywords, so it came up in a lot of searches and I'm sure you came across it Justin. The new owner picked it up last week...
|
Tue Sep 20, 2016 7:33 am |
|
|
RADO
Joined: Sat Jun 25, 2016 8:36 am Posts: 7
|
Re: New member, in the hunt!
Unfortunately, I missed dirtheadz 75' sale by about a month. Bummer.
I'm not seeing all that much right now in my price range... just a couple fixer uppers.
|
Tue Sep 20, 2016 7:37 am |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: New member, in the hunt!
Your old VX looked like a neat rig. Appears you took it about as far as you could! Rear tires rub? Doesn't look like you got that much flex out of the rear. Uniqueness is what got me into an EB! Everyone has a jeep. I wanted to be different.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Tue Sep 20, 2016 11:17 am |
|
|
landshark
Official CCB Member
Joined: Fri Oct 14, 2011 12:16 am Posts: 3942 Location: Denver, Wash Park Area
|
New member, in the hunt!
Keep looking especially on classic broncos.com. There was one on there yesterday or the day before in the classified section but no pics that might be close to what you want to start with. I saw your ad on CL as well nice rig.
_________________ 1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
|
Tue Sep 20, 2016 11:20 am |
|
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am Posts: 6198 Images: 0 Location: Lakewood
|
Re: New member, in the hunt!
How did you like those ORis? I kicked around going that route, but they don't turn up cheap on Craigslist.
|
Tue Sep 20, 2016 5:18 pm |
|
|
RADO
Joined: Sat Jun 25, 2016 8:36 am Posts: 7
|
Re: New member, in the hunt!
|
Tue Sep 20, 2016 8:28 pm |
|
|
landshark
Official CCB Member
Joined: Fri Oct 14, 2011 12:16 am Posts: 3942 Location: Denver, Wash Park Area
|
Re: New member, in the hunt!
_________________ 1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
|
Tue Sep 27, 2016 8:20 am |
|
|
RADO
Joined: Sat Jun 25, 2016 8:36 am Posts: 7
|
Re: New member, in the hunt!
Wow, that Bronco in TN is a steal! Too bad it's not local, as I'm sure it will be gone before I have time to make a move on it. ... I looked at a Bronco in Thornton on Monday. Not bad, but I thought the price was a bit high for the specs. The front end was replaced with a 44 and everything on the axle did appear new. Overall it drove pretty well, although I had an issue with my knee clearing the 3-spd shifter in 1st gear. No power steering, drum brakes all around, rust on the rockers & floor, no info on engine age or rebuild. http://denver.craigslist.org/cto/5799836354.html
|
Wed Sep 28, 2016 7:22 am |
|
|
|
|
Page 1 of 1
|
[ 13 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|