|
|
Register •
FAQ
• Login
|
|
|
It is currently Fri Nov 22, 2024 9:37 pm
|
|
Page 1 of 1
|
[ 4 posts ] |
|
C-4 Cooling line connection measurements
| Author |
Message |
|
landshark
Official CCB Member
Joined: Fri Oct 14, 2011 12:16 am
Posts: 3942
Location: Denver, Wash Park Area
|
 C-4 Cooling line connection measurements Ok i know this has been rehashed a bunch but I have fumbled around long enough to just ask what are the sizes for the rear C4 transmission connection on the C4 and the size of the flared stock cooling line that goes into the C4?
I added a transmission cooler under the passenger seat and want to put it inline with the stock return lines where it connects at the C4. From what I have read I will need this on the transmission side..
"The original fittings are National Standard Free-Fitting Straight Mechanical Pipe Thread (NPSM) with an o-ring and 5/16" inverted flare on the outside. They are close to 1/8" NPT but the hole is not tappered. You could crack the case trying to use an NPT fitting. There are 5/16" inverted flare to -6 adapters available. Just have to keep the original adapters in place.
5/16" inv (1/2"-20) x -6
Aeroquip
#FCM2111"
no idea on the stock cooler line...
Looking to convert to -6an
_________________
1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
|
| Thu Mar 02, 2017 9:43 pm |
|
|
|
Viperwolf1
Official CCB Member
Joined: Tue May 07, 2013 10:37 pm
Posts: 1485
|
Re: C-4 Cooling line connection measurements Stock tubing is 5/16". You can use the aeroquip adapters above to get to an-6. You could also tie back into the stock tubing with some AN-TO-TUBE adapters. I believe you can get -6 to 5/16".
|
| Thu Mar 02, 2017 10:06 pm |
|
|
|
landshark
Official CCB Member
Joined: Fri Oct 14, 2011 12:16 am
Posts: 3942
Location: Denver, Wash Park Area
|
Re: C-4 Cooling line connection measurements great, i will swing by ontrack performance and see if they have what i need.
_________________
1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
|
| Fri Mar 03, 2017 9:10 am |
|
|
|
airbur
Official CCB Member
Joined: Wed Sep 29, 2010 8:39 am
Posts: 1721
Images: 0
Location: Castle Pines, CO
|
Re: C-4 Cooling line connection measurements I used those sizes. Not sure if these images help.
You do not have the required permissions to view the files attached to this post.
_________________
Sold: 1970 w/427W Injected Stroker
|
| Sun Mar 12, 2017 4:03 pm |
|
|
|
|
|
Page 1 of 1
|
[ 4 posts ] |
|
Who is online |
Users browsing this forum: Google [Bot] and 50 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
