|
It is currently Sun Nov 24, 2024 5:49 pm |
|
All times are UTC - 7 hours [ DST ] |
|
Page 1 of 1 |
[ 10 posts ] |
| Print view | Previous topic | Next topic |
Radiator shop recommendation
| Author | Message |
|---|---|
|
Official CCB Member   Joined: Fri Nov 25, 2011 7:34 am Posts: 415 Location: Breckenridge and Franktown, CO 
|
 Radiator shop recommendationHey guys - I’m looking for a local recommendation for a radiator shop to vat and pressure test mine. Thanks - Scott
Sent from my iPad using Tapatalk _________________ Go Hard or Go Home |
| Tue Dec 05, 2017 5:16 pm |
|
|
|
|
Official CCB Member  Joined: Thu Oct 25, 2012 9:33 pm Posts: 2460
|
Re: Radiator shop recommendation I took mine to Intermountain Radiator to do the same and then switch the inlets/outlets for the explorer front dress swap. I don’t remember the cost but it was very fair. You may ask them if they do that on site or if they recommend a place that does it. Only problem is it’s North Denver. But you can drop it off and go grab a beer with me!!
Sent from my iPhone using Tapatalk _________________ 69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274 |
| Tue Dec 05, 2017 6:32 pm |
|
|
|
|
Official CCB Member  Joined: Fri Mar 16, 2012 10:26 am Posts: 1810 Images: 14 Location: Evans,CO
|
Re: Radiator shop recommendation Not pertinent to your exact question but I saw some fancy new-ish radiator parts on steamboat craigslist
https://rockies.craigslist.org/pts/6414254727.html _________________ 1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4 |
| Tue Dec 05, 2017 10:34 pm |
|
|
|
|
Official CCB Member Joined: Fri Nov 25, 2011 7:34 am Posts: 415 Location: Breckenridge and Franktown, CO
|
Re: Radiator shop recommendation _________________ Go Hard or Go Home |
| Wed Dec 06, 2017 2:51 pm |
|
|
|
|
Official CCB Member Joined: Fri Nov 25, 2011 7:34 am Posts: 415 Location: Breckenridge and Franktown, CO
|
Re: Radiator shop recommendation _________________ Go Hard or Go Home |
| Wed Dec 06, 2017 2:52 pm |
|
|
|
|
Official CCB Member Joined: Thu Oct 25, 2012 9:33 pm Posts: 2460
|
Re: Radiator shop recommendation That’s insane. May as well buy a new Champion at that point. Mine was less than $100 for them to test and solder the holes to the opposite sides...
Just let me know when- I’m working from home a majority of the next couple of weeks. Sent from my iPhone using Tapatalk _________________ 69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274 |
| Wed Dec 06, 2017 5:53 pm |
|
|
|
|
Official CCB Member  Joined: Fri Oct 14, 2011 12:16 am Posts: 3942 Location: Denver, Wash Park Area
|
Re: Radiator shop recommendation I think I paid $40 to have mine cleaned and pressure tested on my 76.
_________________ 1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish" |
| Thu Dec 07, 2017 8:41 am |
|
|
|
|
Official CCB Member Joined: Fri Nov 25, 2011 7:34 am Posts: 415 Location: Breckenridge and Franktown, CO
|
Re: Radiator shop recommendation _________________ Go Hard or Go Home |
| Thu Dec 07, 2017 8:55 am |
|
|
|
|
Official CCB Member Joined: Fri Oct 14, 2011 12:16 am Posts: 3942 Location: Denver, Wash Park Area
|
Re: Radiator shop recommendation I have been running the stock brass one in my 76 since i had to tested about 4-5 years ago and will replace it here soon. Never had any issues with it but I flushed it out over the summer, there was allot of scale in it. I guess it is 41 years old...
_________________ 1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish" |
| Thu Dec 07, 2017 9:08 am |
|
|
|
|
Official CCB Member Joined: Fri Nov 25, 2011 7:34 am Posts: 415 Location: Breckenridge and Franktown, CO
|
Re: Radiator shop recommendation _________________ Go Hard or Go Home |
| Thu Dec 07, 2017 9:18 am |
|
|
|
|
|
Page 1 of 1 |
[ 10 posts ] |
|
All times are UTC - 7 hours [ DST ] |
Who is online |
Users browsing this forum: No registered users and 69 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |