|
It is currently Sat Nov 23, 2024 1:59 am |
|
All times are UTC - 7 hours [ DST ] |
|
Page 1 of 1 |
[ 8 posts ] |
| Previous topic | Next topic |
BendPak 4 post lift
| Author | Message |
|---|---|
|
Official CCB Member   Joined: Fri Nov 25, 2011 7:34 am Posts: 415 Location: Breckenridge and Franktown, CO 
|
 BendPak 4 post liftOK — bought this about 18 months ago, and I’m just not using it like I thought I would, so I want to free up room in the shop. Here are the specifics;
https://www.bendpak.com/car-lifts/four- ... ts/hd-9xl/ - BendPak HD 9XL 4 post lift - Aluminum ramps, in addition to the steel ramps that come with it - Drip Pans - Bendpak 4,500 lb Rolling Bridge Jack (this is about a $1,200 upgrade that allows you to raise the wheels off the lift) - Caster kit (so you can roll it around and don’t have to mount it permanently) - I’ll include a super long power extension cord that was custom made for me If you have ceiling height, you can stack 2 cars in the footprint. I’ve got about $5700 in it, including taxes. I’ll let it go for $2,500. It’s pretty much like new. You will need to move it yourself. I can give you the name of a local company who will pick it up, move it, and set it back up for you. Probably around $500 for that service. I’m posting here for a week or so before I put it on Craigslist. Sent from my iPad using Tapatalk _________________ Go Hard or Go Home |
| Fri Jun 14, 2019 11:32 am |
|
|
|
|
Official CCB Member  Joined: Fri Oct 14, 2011 12:16 am Posts: 3942 Location: Denver, Wash Park Area
|
Re: BendPak 4 post lift _________________ 1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish" |
| Fri Jun 14, 2019 3:09 pm |
|
|
|
|
Official CCB Member  Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: BendPak 4 post lift Oh man is right. If I wasn't 16 hours away I'd be all over it.
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141) |
| Fri Jun 14, 2019 5:51 pm |
|
|
|
|
Official CCB Member  Joined: Thu Oct 25, 2012 9:33 pm Posts: 2460
|
Re: BendPak 4 post lift Does that $500 service include raising my garage?! That’s a heck of a deal for someone who can use it!
Sent from my iPhone using Tapatalk _________________ 69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274 |
| Fri Jun 14, 2019 6:11 pm |
|
|
|
|
Official CCB Member  Joined: Sun Oct 16, 2011 7:45 pm Posts: 357 Location: Thornton, Co
|
Re: BendPak 4 post lift How much ceiling height does it require?
_________________ TJ "Everyone suspects himself of at least one of the cardinal virtues, and this is mine: I am one of the few honest people I have ever known." F. Scott Fitzgerald 1974 Ford Bronco 3 1/2 inch James Duff lift ,2 inch body lift, 351w Explorer EFI, Viper built c4, Viper built Dana 20 with wildhorses twin stick, Kinder built Dana 44 with 4.56 gears disc brakes aussie locker and knuckle over conversion, Kinder built 9 inch with grizzly locker 31 spline axles and 4.56 gear |
| Sun Jun 16, 2019 11:34 am |
|
|
|
|
Official CCB Member Joined: Fri Nov 25, 2011 7:34 am Posts: 415 Location: Breckenridge and Franktown, CO
|
Re: BendPak 4 post lift _________________ Go Hard or Go Home |
| Sun Jun 16, 2019 12:19 pm |
|
|
|
|
Official CCB Member Joined: Sun Oct 16, 2011 7:45 pm Posts: 357 Location: Thornton, Co
|
Re: BendPak 4 post lift Makes sense.
_________________ TJ "Everyone suspects himself of at least one of the cardinal virtues, and this is mine: I am one of the few honest people I have ever known." F. Scott Fitzgerald 1974 Ford Bronco 3 1/2 inch James Duff lift ,2 inch body lift, 351w Explorer EFI, Viper built c4, Viper built Dana 20 with wildhorses twin stick, Kinder built Dana 44 with 4.56 gears disc brakes aussie locker and knuckle over conversion, Kinder built 9 inch with grizzly locker 31 spline axles and 4.56 gear |
| Tue Jun 18, 2019 9:17 am |
|
|
|
|
Official CCB Member Joined: Mon Aug 15, 2011 4:25 pm Posts: 8
|
Re: BendPak 4 post lift Please call me Im very interested in your lift?
970-231-6970 |
| Tue Jun 25, 2019 11:04 am |
|
|
|
|
|
Page 1 of 1 |
[ 8 posts ] |
|
All times are UTC - 7 hours [ DST ] |
Who is online |
Users browsing this forum: No registered users and 9 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |