|
It is currently Thu Nov 21, 2024 9:12 pm |
|
All times are UTC - 7 hours [ DST ] |
|
Page 1 of 1 |
[ 20 posts ] |
| Previous topic | Next topic |
stock radius arms
| Author | Message |
|---|---|
|
Official CCB Member  Joined: Wed Feb 23, 2011 4:22 pm Posts: 31 Location: Englewood 
|
 stock radius armsI'm looking for a set of stock radius arms that i can turn into a long arm kit. i don't need the C bushings just the radius arms. Thanks
|
| Mon Feb 28, 2011 10:17 pm |
|
|
|
|
Official CCB Member  Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: stock radius arms I'm going to install Bloody Knuckle arms soonish, you can have mine when I'm done (74). But they are in Gunnison. I do get to and from Denver sometimes. I had a set from a 79 BB, but I think the salvage guy took it with our scrap, I'll look when I go back to work today.
Chad _________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141) |
| Tue Mar 01, 2011 1:36 pm |
|
|
|
|
Official CCB Member  Joined: Mon Jan 03, 2011 2:59 pm Posts: 1940 Location: Witness Protection Program
|
Re: stock radius arms If it doesn't work out with Gunnibronco, try PMing Dalli. He has tons of them.
|
| Tue Mar 01, 2011 3:11 pm |
|
|
|
|
Official CCB Member  Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: stock radius arms _________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org |
| Tue Mar 01, 2011 5:03 pm |
|
|
|
|
Official CCB Member Joined: Wed Feb 23, 2011 4:22 pm Posts: 31 Location: Englewood
|
Re: stock radius arms ya any thing i can get would be great. i only really need the first 18 inches of them so damaged ones are ok. I will post pics and how i did them once i get started. It should be fun. Just let me know when you guys have some that are available.
thanks |
| Tue Mar 01, 2011 7:08 pm |
|
|
|
|
Official CCB Member Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: stock radius arms I'll post up here or PM you when I'm done. I wish I could be more specific, but we are finally busy at work again, and I don't have as much time to goof off as I used to. Also, ski season interferes with house & truck projects. Hope this can work for you.
Chad _________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141) |
| Tue Mar 01, 2011 7:49 pm |
|
|
|
|
Official CCB Member Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: stock radius arms My stock arms should be coming off this weekend. I have all my new bracketry etc and she's going under the knife tomorrow!! I am sure we can figure out how to get them transported to Denver. You need the front caps too?
J.D. _________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org |
| Fri Apr 08, 2011 12:43 pm |
|
|
|
|
Official CCB Member Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: stock radius arms Looks like you are a week ahead of me. I'll be doing the deed next weekend.
Chad _________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141) |
| Fri Apr 08, 2011 4:57 pm |
|
|
|
|
Official CCB Member Joined: Wed Feb 23, 2011 4:22 pm Posts: 31 Location: Englewood
|
Re: stock radius arms Ya I will need the front caps too. The plan is to build a set of long arms out of the stock radius arms and then swap them out for my old ones. That way the bronco is not down for to long. I'm not in a big hurry for them as DOM tubing is really $$$$$. But sooner the better.
|
| Fri Apr 08, 2011 7:45 pm |
|
|
|
|
Official CCB Member Joined: Thu Nov 11, 2010 10:31 am Posts: 770
|
Re: stock radius arms Mine are off and sitting in my garage, let me know. I work saturday in highlands ranch or I am off today and Sunday.
_________________ 71' bronco, np435 w/trailbanger, 302 efi, 35" KM3 on 17x9 Fuel Anza, warn xd9000i, cage arms, 5" lift |
| Fri Apr 15, 2011 11:01 am |
|
|
|
|
Official CCB Member Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: stock radius arms Did you get a set of arms yet? Mine are setting in my garage and maybe we could talk someone going to the 'Springs breakfast who might be going to denver soon to take them up there. Let me know.
J.D. _________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org |
| Thu Apr 21, 2011 7:24 am |
|
|
|
|
Official CCB Member Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: stock radius arms 3rd set available, but in Gunnison. The market is flooded with radius arms.
Chad _________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141) |
| Thu Apr 21, 2011 11:53 am |
|
|
|
|
Official CCB Member  Joined: Fri Nov 19, 2010 11:16 pm Posts: 587 Location: Lakewood/Green Mtn.
|
Re: stock radius arms I will take one set of arms if anybody still has them laying around.
|
| Sat Apr 23, 2011 3:09 pm |
|
|
|
|
Official CCB Member Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: stock radius arms You can have mine. I've also got the end caps, with spring mount tabs welded to them & the poly rear radius arm bushings & all hardware. I'll ship them, at your cost, or hold them till I go to Denver, or you come to Gunnison. Hope you can find some closer, but if you don't let me know.
Chad _________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141) |
| Sat Apr 23, 2011 3:57 pm |
|
|
|
|
Official CCB Member Joined: Fri Nov 19, 2010 11:16 pm Posts: 587 Location: Lakewood/Green Mtn.
|
Re: stock radius arms What would shipping be, any idea? I shipped a 50# box to Lajunta for $30.00. I will be at Taylor park in a few monthes but would like them before that :)
|
| Sat Apr 23, 2011 4:14 pm |
|
|
|
|
Official CCB Member  Joined: Wed Oct 27, 2010 6:25 pm Posts: 4901 Images: 0 Location: Colorado Springs
|
Re: stock radius arms I picked up Jesus' arms from him today in anticipation of going to Denver/Castle Rock on Monday. Shoot me your number and we'll set something up to drop them off to you.
_________________ Stroppe'd 1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar. The Terrible One 1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering. 1973 Stroppe Baja project |
| Sat Apr 23, 2011 5:35 pm |
|
|
|
|
Official CCB Member Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: stock radius arms Let me know if you are still interested. I have no idea how much they weigh or how much it'll cost. Give me a zip code & I'll take a weight & get a price, if you need.
Chad _________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141) |
| Sat Apr 23, 2011 9:44 pm |
|
|
|
|
Official CCB Member Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: stock radius arms Zack, let me know if you need me to do any coordinating! Thanks for the help in getting them to denver.
J.D. _________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org |
| Mon Apr 25, 2011 7:36 am |
|
|
|
|
Official CCB Member Joined: Wed Feb 23, 2011 4:22 pm Posts: 31 Location: Englewood
|
Re: stock radius arms AKAFrankcastle if you are in denver today i will take the radius arms. I'm off all day so just give me a call. Scott
303-506-9227 |
| Mon Apr 25, 2011 8:36 am |
|
|
|
|
Official CCB Member Joined: Sat Oct 23, 2010 3:20 pm Posts: 393 Location: Pueblo West
|
Re: stock radius arms If all this falls through I have a couple sets for sale .JGZ
|
| Mon Apr 25, 2011 8:54 am |
|
|
|
|
|
Page 1 of 1 |
[ 20 posts ] |
|
All times are UTC - 7 hours [ DST ] |
Who is online |
Users browsing this forum: No registered users and 6 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |