|
It is currently Tue Dec 03, 2024 11:26 am |
|
All times are UTC - 7 hours [ DST ] |
|
Page 9 of 9 |
[ 259 posts ] | Go to page Previous 1 ... 5, 6, 7, 8, 9 |
| Print view | Previous topic | Next topic |
TJ's 74 Bronco money pit
| Author | Message |
|---|---|
|
Official CCB Member   Joined: Wed Sep 29, 2010 10:03 pm Posts: 4371 Images: 0 Location: Parker, CO 
|
 Re: TJ's 74 Bronco money pitIt’s been a long road, very happy you have it to a level you like it. I think it looks great.
_________________ Best to Date MPG: 26.6 |
| Fri Jun 21, 2019 3:26 pm |
|
|
|
|
Official CCB Member  Joined: Sun Oct 16, 2011 7:45 pm Posts: 357 Location: Thornton, Co
|
Re: TJ's 74 Bronco money pit I installed an on board air setup. It cost about 250 in total, so half the price of the ARB compressor I was considering.
You do not have the required permissions to view the files attached to this post. _________________ TJ "Everyone suspects himself of at least one of the cardinal virtues, and this is mine: I am one of the few honest people I have ever known." F. Scott Fitzgerald 1974 Ford Bronco 3 1/2 inch James Duff lift ,2 inch body lift, 351w Explorer EFI, Viper built c4, Viper built Dana 20 with wildhorses twin stick, Kinder built Dana 44 with 4.56 gears disc brakes aussie locker and knuckle over conversion, Kinder built 9 inch with grizzly locker 31 spline axles and 4.56 gear |
| Mon Nov 18, 2019 5:26 pm |
|
|
|
|
Official CCB Member Joined: Sun Oct 16, 2011 7:45 pm Posts: 357 Location: Thornton, Co
|
Re: TJ's 74 Bronco money pit I ordered it in July and I finally got it. It was worth the wait. Thank you BC Broncos.
The top goes together easy enough, but getting the snaps on is a son of a gun. You do not have the required permissions to view the files attached to this post. _________________ TJ "Everyone suspects himself of at least one of the cardinal virtues, and this is mine: I am one of the few honest people I have ever known." F. Scott Fitzgerald 1974 Ford Bronco 3 1/2 inch James Duff lift ,2 inch body lift, 351w Explorer EFI, Viper built c4, Viper built Dana 20 with wildhorses twin stick, Kinder built Dana 44 with 4.56 gears disc brakes aussie locker and knuckle over conversion, Kinder built 9 inch with grizzly locker 31 spline axles and 4.56 gear |
| Mon Feb 24, 2020 2:00 am |
|
|
|
|
Official CCB Member  Joined: Fri Mar 16, 2012 10:26 am Posts: 1810 Images: 14 Location: Evans,CO
|
Re: TJ's 74 Bronco money pit I really like the Look of those!
_________________ 1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4 |
| Mon Feb 24, 2020 10:43 am |
|
|
|
|
Official CCB Member  Joined: Fri Oct 14, 2011 12:16 am Posts: 3942 Location: Denver, Wash Park Area
|
Re: TJ's 74 Bronco money pit _________________ 1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish" |
| Mon Feb 24, 2020 11:51 am |
|
|
|
|
Official CCB Member Joined: Sun Oct 16, 2011 7:45 pm Posts: 357 Location: Thornton, Co
|
Re: TJ's 74 Bronco money pit Thanks for the info, I'll order some.
_________________ TJ "Everyone suspects himself of at least one of the cardinal virtues, and this is mine: I am one of the few honest people I have ever known." F. Scott Fitzgerald 1974 Ford Bronco 3 1/2 inch James Duff lift ,2 inch body lift, 351w Explorer EFI, Viper built c4, Viper built Dana 20 with wildhorses twin stick, Kinder built Dana 44 with 4.56 gears disc brakes aussie locker and knuckle over conversion, Kinder built 9 inch with grizzly locker 31 spline axles and 4.56 gear |
| Mon Feb 24, 2020 12:16 pm |
|
|
|
|
Official CCB Member Joined: Fri Oct 14, 2011 12:16 am Posts: 3942 Location: Denver, Wash Park Area
|
Re: TJ's 74 Bronco money pit I also found - and it will depend on your top and the fit - that using a door panel clip removal tool is nice as it makes the snaps last longer and pops them right off. I happened to have one from other projects and found it useful :)
https://www.amazon.com/Cal-Hawk-Door-Pa ... 336&sr=8-1 _________________ 1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish" |
| Mon Feb 24, 2020 12:53 pm |
|
|
|
|
Official CCB Member Joined: Sun Oct 16, 2011 7:45 pm Posts: 357 Location: Thornton, Co
|
Re: TJ's 74 Bronco money pit Good idea!
_________________ TJ "Everyone suspects himself of at least one of the cardinal virtues, and this is mine: I am one of the few honest people I have ever known." F. Scott Fitzgerald 1974 Ford Bronco 3 1/2 inch James Duff lift ,2 inch body lift, 351w Explorer EFI, Viper built c4, Viper built Dana 20 with wildhorses twin stick, Kinder built Dana 44 with 4.56 gears disc brakes aussie locker and knuckle over conversion, Kinder built 9 inch with grizzly locker 31 spline axles and 4.56 gear |
| Mon Feb 24, 2020 3:07 pm |
|
|
|
|
Official CCB Member Joined: Wed Sep 29, 2010 10:03 pm Posts: 4371 Images: 0 Location: Parker, CO
|
Re: TJ's 74 Bronco money pit NASCAR Mike, does he still go by that nick?, had some different style canvas attachment snaps on his locally made 1/2 cab soft top, something like this. They seemed to work well in the cold and looked like they’d hold up a bit better over time.
 _________________ Best to Date MPG: 26.6 |
| Mon Feb 24, 2020 8:20 pm |
|
|
|
|
Official CCB Member  Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: TJ's 74 Bronco money pit Top looks great!!
Having had tonneau covers on all my trucks, I knew to avoid snaps and velcro. There was two options that would work here assuming that there is some sort of channel mounted to the bedsides? This cover had an extruded aluminum channel that mounted to the bed. Then the cover had an extruded plastic hook attached to the fabric. This was great as there were no snaps and no velcro. Here is the basic concept for this tonneau. It would have to be rolled 90 with the channel facing down to work for a bronco top.  _________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org |
| Tue Feb 25, 2020 9:14 am |
|
|
|
|
Official CCB Member Joined: Fri Oct 14, 2011 12:16 am Posts: 3942 Location: Denver, Wash Park Area
|
Re: TJ's 74 Bronco money pit _________________ 1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish" |
| Tue Feb 25, 2020 10:24 am |
|
|
|
|
Official CCB Member Joined: Fri Oct 14, 2011 12:16 am Posts: 3942 Location: Denver, Wash Park Area
|
Re: TJ's 74 Bronco money pit _________________ 1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish" |
| Tue Feb 25, 2020 10:27 am |
|
|
|
|
Official CCB Member Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: TJ's 74 Bronco money pit What tightens the fabric? Perhaps I don't understand the install. If my assumptions are correct, this style of fastening wouldn't be any different than the snaps.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org |
| Tue Feb 25, 2020 10:36 am |
|
|
|
|
Official CCB Member Joined: Sun Oct 16, 2011 7:45 pm Posts: 357 Location: Thornton, Co
|
Re: TJ's 74 Bronco money pit It is tight to begin with you pull it and snap it. Once the top is installed it has 2 turnbuckles on the rear bar that you can tighten when needed.
_________________ TJ "Everyone suspects himself of at least one of the cardinal virtues, and this is mine: I am one of the few honest people I have ever known." F. Scott Fitzgerald 1974 Ford Bronco 3 1/2 inch James Duff lift ,2 inch body lift, 351w Explorer EFI, Viper built c4, Viper built Dana 20 with wildhorses twin stick, Kinder built Dana 44 with 4.56 gears disc brakes aussie locker and knuckle over conversion, Kinder built 9 inch with grizzly locker 31 spline axles and 4.56 gear |
| Fri Feb 28, 2020 2:57 pm |
|
|
|
|
Official CCB Member Joined: Sun Oct 16, 2011 7:45 pm Posts: 357 Location: Thornton, Co
|
Re: TJ's 74 Bronco money pit I snapped a front axle shaft this weekend. On a good note it was a stock shaft and I have been wanting an upgrade for years. I ordered the TBP "Trail Terminator" front axle shafts. The website advertises 60% stronger than stock. We shall see.
_________________ TJ "Everyone suspects himself of at least one of the cardinal virtues, and this is mine: I am one of the few honest people I have ever known." F. Scott Fitzgerald 1974 Ford Bronco 3 1/2 inch James Duff lift ,2 inch body lift, 351w Explorer EFI, Viper built c4, Viper built Dana 20 with wildhorses twin stick, Kinder built Dana 44 with 4.56 gears disc brakes aussie locker and knuckle over conversion, Kinder built 9 inch with grizzly locker 31 spline axles and 4.56 gear |
| Wed Mar 17, 2021 2:04 pm |
|
|
|
|
Official CCB Member Joined: Sun Oct 16, 2011 7:45 pm Posts: 357 Location: Thornton, Co
|
Re: TJ's 74 Bronco money pit Oops I broke both sides at one time. lol
_________________ TJ "Everyone suspects himself of at least one of the cardinal virtues, and this is mine: I am one of the few honest people I have ever known." F. Scott Fitzgerald 1974 Ford Bronco 3 1/2 inch James Duff lift ,2 inch body lift, 351w Explorer EFI, Viper built c4, Viper built Dana 20 with wildhorses twin stick, Kinder built Dana 44 with 4.56 gears disc brakes aussie locker and knuckle over conversion, Kinder built 9 inch with grizzly locker 31 spline axles and 4.56 gear |
| Thu Mar 18, 2021 4:02 pm |
|
|
|
|
Official CCB Member Joined: Wed Sep 29, 2010 10:03 pm Posts: 4371 Images: 0 Location: Parker, CO
|
Re: TJ's 74 Bronco money pit Um, that may mean that you need to ease up on the skinny pedal!
_________________ Best to Date MPG: 26.6 |
| Fri Mar 19, 2021 5:49 pm |
|
|
|
|
Official CCB Member Joined: Sun Oct 16, 2011 7:45 pm Posts: 357 Location: Thornton, Co
|
Re: TJ's 74 Bronco money pit That's just so difficult.
_________________ TJ "Everyone suspects himself of at least one of the cardinal virtues, and this is mine: I am one of the few honest people I have ever known." F. Scott Fitzgerald 1974 Ford Bronco 3 1/2 inch James Duff lift ,2 inch body lift, 351w Explorer EFI, Viper built c4, Viper built Dana 20 with wildhorses twin stick, Kinder built Dana 44 with 4.56 gears disc brakes aussie locker and knuckle over conversion, Kinder built 9 inch with grizzly locker 31 spline axles and 4.56 gear |
| Fri Mar 19, 2021 6:27 pm |
|
|
|
|
Official CCB Member Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: TJ's 74 Bronco money pit LOL! It is at times, but I know my wallet dictates how much throttle is applied after a few sets of u-joints and shafts!
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org |
| Mon Mar 22, 2021 8:22 am |
|
|
|
|
|
Page 9 of 9 |
[ 259 posts ] | Go to page Previous 1 ... 5, 6, 7, 8, 9 |
|
All times are UTC - 7 hours [ DST ] |
Who is online |
Users browsing this forum: No registered users and 12 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |